Products For Sale 
transpixel
transpixel A Model,

New style Fluted Knobs include 1/8 inch open cell rubber for top of cheek piece to improve weld (you can opt to use it or not) $60.00 plus $6.00 shipping. 

To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261. 

More feed back. 

Your cheek piece is excellent and much better than I'd hoped for a stock add-on. I'd recommend it in a heart beat to anyone. Clearly preferable to me to any strap on pad and a solid cheek piece would, of course, render irons unuseable. 

RJ
***************************************

Dear Karsten,

I got your cheek piece and just finished the installation. 
It's a simple and very solid solution for faster target acquisition and better cheek weld. 

I like it, thanks!

- Gabor

****************************************
Karsten,

I received my cheekpiece today. Installation was easy and it makes both the iron and telescopic sights much more functional when using both. It also looks good on the factory SA M1A synthetic stock. Great product. Thanks.


- Brian


transpixel
transpixel
transpixel
transpixel B Model,

Redesigned Kydex Cheek Piece with new locking system. Note the new connectors are flusher and lighter but will require an Allen Wrench (Not Supplied) Black only for connectors. $60.00 plus $6.00 shipping 2-3 day Priority Mail

To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261. 




Feed back from a buyer, 

Karsten, Got the cheekpeice today and slid right on like a dream. Instruction were great and all 4 holes line up perfect. Height worked out great, Aimpoint dot dead center when you throw up the weapon. Thanks for a great product

transpixel
transpixel
transpixel
transpixel C Model, 

$60.00 plus shipping $6.00 Priority Mail. 

C Model with Black Allen Head Connectors and Straight Slots. 

 To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261. 
****************************************
Got the Cheek Rest. Installed in less than 10 minutes. 
 
Set it on the stock where I wanted it, checked for bolt clearance, traced the slots on the stock with a pencil, removed the rest, measured 1 3/4" down on each side of the stock and drilled holes on each side. Holes lined up less than a 32nd off. I installed the rest, ran the bolts through, set the height, and tightened it up. Probably took longer to type this than it did to install. 
 
I got to shoot with it today. If you recall I told you about my nephew's "plastic" cheek rest (from Desert Warrior or something like that) started giving way when it got warm. Well we broke 110 degrees today and yours works great!!! Not a sign of give at all!!!! The cheek rest had to have gotten well over 110 as it sat in the sun for quite a while between shoots.
 
Thanks Karsten!

Keep up the great work and superior service!

CM

****************************************
Outstanding product. Easy to install. Adjust easily to provide proper cheek weld for any sight and mount arrangement. Please don't stop making them, because I plan to order more when I start future projects. Thanks for a great product!   

****************************************
Below is a link to a Highly Detailed Installation Pictorial. 

http://spystyle.arcadecontrols.com/guns/karsten/800/index.htm transpixel
transpixel
A Model,

New style Fluted Knobs include 1/8 inch open cell rubber for top of cheek piece to improve weld (you can opt to use it or not) $60.00 plus $6.00 shipping.

To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261.

More feed back.

Your cheek piece is excellent and much better than I'd hoped for a stock add-on. I'd recommend it in a heart beat to anyone. Clearly preferable to me to any strap on pad and a solid cheek piece would, of course, render irons unuseable.

RJ
***************************************

Dear Karsten,

I got your cheek piece and just finished the installation.
It's a simple and very solid solution for faster target acquisition and better cheek weld.

I like it, thanks!

- Gabor

****************************************
Karsten,

I received my cheekpiece today. Installation was easy and it makes both the iron and telescopic sights much more functional when using both. It also looks good on the factory SA M1A synthetic stock. Great product. Thanks.


- Brian


B Model,

Redesigned Kydex Cheek Piece with new locking system. Note the new connectors are flusher and lighter but will require an Allen Wrench (Not Supplied) Black only for connectors. $60.00 plus $6.00 shipping 2-3 day Priority Mail

To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261.




Feed back from a buyer,

Karsten, Got the cheekpeice today and slid right on like a dream. Instruction were great and all 4 holes line up perfect. Height worked out great, Aimpoint dot dead center when you throw up the weapon. Thanks for a great product

C Model,

$60.00 plus shipping $6.00 Priority Mail.

C Model with Black Allen Head Connectors and Straight Slots.

To order you can send a check or MO, I have a paypal account at Karsten@xmission.com or for Visa and MC orders call 801-577-5261.
****************************************
Got the Cheek Rest. Installed in less than 10 minutes.

Set it on the stock where I wanted it, checked for bolt clearance, traced the slots on the stock with a pencil, removed the rest, measured 1 3/4" down on each side of the stock and drilled holes on each side. Holes lined up less than a 32nd off. I installed the rest, ran the bolts through, set the height, and tightened it up. Probably took longer to type this than it did to install.

I got to shoot with it today. If you recall I told you about my nephew's "plastic" cheek rest (from Desert Warrior or something like that) started giving way when it got warm. Well we broke 110 degrees today and yours works great!!! Not a sign of give at all!!!! The cheek rest had to have gotten well over 110 as it sat in the sun for quite a while between shoots.

Thanks Karsten!

Keep up the great work and superior service!

CM

****************************************
Outstanding product. Easy to install. Adjust easily to provide proper cheek weld for any sight and mount arrangement. Please don't stop making them, because I plan to order more when I start future projects. Thanks for a great product!

****************************************
Below is a link to a Highly Detailed Installation Pictorial.

http://spystyle.arcadecontrols.com/guns/karsten/800/index.htm
Powered by Gallery v1.4.4-pl6 RSS